Adsorptive removal of nickel from water using volcanic rocks

Abstract

This paper presents the results of a study on Ni(II) removal from water by adsorption using abundant and low-cost volcanic rock grains: Scoria (VSco) and Pumice (VPum), which could be used as an alternative approach to remove potentially harmful metals from contaminated water. Basic process characteristics were determined under batch conditions. The maximum adsorption capacities for Ni(II) on VSco and VPum were found to be 980 and 1187mgkg-1, respectively. These results were obtained at the optimized conditions of pH (5.0), temperature (24.9°C), contact time (24h), adsorbent/solution ratio (1:20), particle size (fine) and with the variation of initial concentrations between 0.5 and 50mgL-1. Competitive adsorption of Ni(II), Cd(II) and Cu(II) on the adsorbents present in binary as well as ternary mixtures were also compared with the single metal solution. Thus, given that enough volcanic rock grains are provided, Ni(II) ions could be removed even from a metal ion bearing matrix. A number of available models like Lagergren pseudo-first order kinetics, second-order kinetics, intra-particle diffusion and liquid film diffusion were utilized to evaluate the kinetics and the mechanism of the sorption interactions. The results revealed that the pseudo-second order equation best described the kinetics mechanisms of Ni(II) adsorption although the removal process was found to be complex. Moreover, three adsorption models have been evaluated in order to attempt to fit the experimental data, namely the Langmuir, the Freundlich and the Redlich-Peterson isotherm models. It was found that the first two isotherms most closely described the adsorption parameters. © 2010 Elsevier Ltd.