Mobile DRAM is widely employed in portable electronic devices due to its fea ture of low power consumption. Recently, as the market trend renders integra tion of various features in one chip, mobile DRAM is required to have not only low power…
Papers in Design Automation
Design Automation papers in Computer and Information Science, A
Papers
1 - 20 of
765
in Design Automation, A
-
-
-
This paper presents an indoor localization system for the visually impaired. The basis of our system is an Extended Kalman Filter (EKF) for six degree-of-freedom (d.o.f.) position and orientation (pose) estimation. The sensing platform consists of…
-
A 60-mW MPEG4 video codec has been developed for mobile multimedia applications. This codec supports both the H.263 ITU-T recommendation and the simple profile of MPEG4 committee draft version 1 released in November 1997. It is composed of a 16-bit…
-
This paper describes an Itanium processor implemented in 65 nm process with 8 layers of Cu interconnect. The 21.5 mm by 32.5 mm die has 2.05B transistors. The processor has four dual-threaded cores, 30 MB of cache, and a system interface that…
-
A system based on a hierarchical scheduler is a system in which the processor is shared between several collaborative schedulers. Such schedulers exist since 1960 and they are becoming more and more investigated and proposed in real-life…
-
-
Aberration theory of plane-symmetric optical systems of mirror and grating has been developed based on the wavefront aberration method. A toroidal reference wavefront surface is used to define the wavefront aberration. Based on the ray geometry, the…
-
A miniature-microbial fuel cell (mini-MFC, chamber volume: 1.2 mL) was used to monitor biofilm development from a pure culture of Shewanella oneidensis DSP10 on graphite felt (GF) under minimal nutrient conditions. ESEM evidence of biofilm formation…
-
An electroswitchable and tunable biofuel cell based on the biocatalyzed oxidation of glucose is described. The anode consists of a Cu(2+)-poly(acrylic acid) film on which the redox-relay pyrroloquinoline quinone (PQQ) and the flavin adenine…
-
We present an automated bit-width optimization methodology for polynomial-based hardware function evaluation. Due to the analytical nature of the approach, overflow protection and precision accurate to one unit in the last place (ulp) can be…
-
Simulation, emulation, and wide-area testbeds exhibit different strengths and weaknesses with respect to fidelity, scalability, and manageability. Fidelity is a key concern since simulation or emulation inaccuracies can lead to a dramatic and…
-
Provided certain obstacles are overcome, we believe Cloud Computing has the potential to transform a large part of the IT industry, making software even more attractive as a service and shaping the way IT hardware is designed and purchased.…
-
The generalized assignment problem examines the maximum profit assignments of jobs to agents such that each job is assigned to precisely one agent subject to capacity restrictions on the agents. A new algorithm for the generalized assignment problem…
-
We propose a bridging model aimed at capturing the most basic resource parameters of multi-core architectures. We suggest that the considerable intellectual effort needed for designing efficient algorithms for such architectures may be most…
-
The success of the von Neumann model of sequential computation is attributable to the fact that it is an efficient bridge between software and hardware: high-level languages can be efficiently compiled on to this model; yet it can be effeciently…
-
In this paper, we propose a method to detect crosstalk faults within and among channels of mesh NoCs, using a global test strategy that is based on a particular set of test paths and test packet. All test paths must be activated simultaneously…
-
-
Understanding and supporting conceptual model design is an important issue in Model Management System (MMS) research. While there are a broad range of aspects which affect conceptual design, this study focuses on the use and the support of…
-
The effect of four different biostimulants was investigated in this study. Biostimulants Radifarm(R), Megafol(R), Benefit(R) and Viva(R) were applied according to the manufacturer's advice. Pepper hybrid Vedrana F1 was used to evaluate the effect of…
Papers in associated sub-disciplines
Sign up today - FREE
Mendeley saves you time finding and organizing research. Learn more
- All your research in one place
- Add and import papers easily
- Access it anywhere, anytime

