Hydrothermal stability of cobalt silica membranes in a water gas shift membrane reactor

115Citations
Citations of this article
46Readers
Mendeley users who have this article in their library.
Get full text

Abstract

Cobalt silica membranes were fabricated using sol-gel techniques for separation of H2 in a membrane reactor set up for the low temperature (up to 300 °C) water gas shift (WGS) reaction. Single dry gas testing prior to reaction showed He/N2 and H2/CO2 selectivities increasing from 75-400 to 45-160 as the temperature increased from 100 to 250 °C, respectively. During reaction the membrane delivered a H2 permeation purity of 89-95% at high conversions, with the higher water ratio conversion providing superior membrane operational performance. Characterisation of bulk gels indicated that the cobalt silica was hydrophilic and exposure to steam at 200 °C resulted in the densification of the film matrix. The cobalt doping allowed for the membrane structural microporosity to be maintained as H2 selectivity was not affected by steam exposure, though the flux decreased due to pore collapse of the film matrix. A total of 8 thermal cycle testing were carried out from room temperature to 300 °C, and the membrane displayed good hydrothermal stability, maintaining a high H2 selectivity for over 200 h of operation. © 2008 Elsevier B.V. All rights reserved.

Cite

CITATION STYLE

APA

Battersby, S., Smart, S., Ladewig, B., Liu, S., Duke, M. C., Rudolph, V., & Costa, J. C. D. da. (2009). Hydrothermal stability of cobalt silica membranes in a water gas shift membrane reactor. Separation and Purification Technology, 66(2), 299–305. https://doi.org/10.1016/j.seppur.2008.12.020

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free