An innovative platform was developed for ultrasensitive microsensors based on microcantilevers patterned with crosslinked copolymeric hydrogels. A novel UV free-radical photolithography process was utilized to precisely align and pattern environmentally responsive hydrogels onto silicon microcantilevers, after microcantilevers were fabricated and released. Specifically, a crosslinked poly(methacrylic acid) network containing high amounts of poly(ethylene glycol) dimethacrylate was prepared and investigated. Hydrogels were patterned onto the silicon microcantilevers utilizing a mask aligner to allow for precise positioning. The silicon surface was modified with γ-methacryloxypropyl trimethoxysilane to gain covalent adhesion between the polymer and the silicon. The hydrogels sensed and responded to changes in environmental pH resulting in a variation in surface stress that deflected the microcantilever. The bending response of patterned cantilevers with a change in environmental pH was observed, showing the possibility to construct MEMS/BioMEMS sensors based on microcantilevers patterned with environmentally responsive hydrogels. An extraordinary maximum sensitivity of 1 nm/5 × 10-5 ΔpH was observed, demonstrating the ultrasensitivity of this microsensor platform.
CITATION STYLE
Hilt, J. Z., Gupta, A. K., Bashir, R., & Peppas, N. A. (2003). Ultrasensitive biomens sensors based on microcantilevers patterned with environmentally responsive hydrogels. Biomedical Microdevices, 5(3), 177–184. https://doi.org/10.1023/A:1025786023595
Mendeley helps you to discover research relevant for your work.