Integrated electrocoagulation-flotation of microalgae to produce Mg-laden microalgal biochar for seeding struvite crystallization

Abstract

Developing sustainable materials for recovering and recycling nutrients from wastewater is critically needed for nutrients such as phosphorus that have a diminishing supply. Struvite crystallization is emerging as a promising strategy for phosphorus recovery which can be enhanced with seeding through microalgal biochar. The main bottleneck of using microalgae is its high harvesting cost. In this study, an integrated electrocoagulation-flotation (ECF) process is used to recover and at the same time modify the algal surface with magnesium anode and inert carbon cathode. Harvesting efficiency of 98% was achieved with 40.78 mA cm−2, 0.5 cm inter-electrode distance and energy consumption of 4.03 kWh kg−1 in 15 min. The harvested microalgae were pyrolyzed to obtain a yield of 52.90% Mg-laden microalgal biochar. Simultaneously, surface impregnation of 28% magnesium was attained as confirmed by Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Phosphorus recovery and struvite yield of 93.70% and 2.66 g L−1, respectively, were obtained from dosing 1.50 g L−1 Mg-laden microalgal biochar. Comparison of physicochemical characteristics of residual supernatant after microalgal harvesting and struvite recovery showed that the combined use of both the residuals can serve as a sustainable growth medium for microalgae. The overall operating cost of the integrated process was found to be 2.48 USD kg−1 with a total energy consumption of 10.76 kWh kg−1, which was found to be lower than conventional harvesting unit processes such as centrifugation and filtration. This novel approach can help attaining a circular bioeconomy by encompassing nutrient recovery and waste management in an integrated process.