In the last years, additive manufacturing has become a widespread technology which enables lightweight-design based on topological optimization. Therefore, generation of lattice structures with complex geometries and small thicknesses is allowed. However, a complete metallurgical and mechanical characterization of these materials is crucial for their effective adoption as alternative to conventionally manufactured alloys. Industrial applications require good corrosion resistance and mechanical strength to provide sufficient reliability and structural integrity. Particularly, fatigue behavior becomes a crucial factor since presence of poor surface finishing can decrease fatigue limits significantly. In this work, both the low-cycle-fatigue and high-cycle-fatigue behaviors of Inconel 625, manufactured by Selective Laser Melting, were investigated. Fatigue samples were designed to characterize small parts and tested in the as-built condition since reticular structures are usually adopted without any finishing operation. Microstructural features were studied by light-optical microscopy and scanning-electron microscopy. Finally, fatigue failures were deeply investigated considering fracture mechanics principles with the Kitagawa–Takahashi diagram.
CITATION STYLE
Concli, F., Gerosa, R., Panzeri, D., & Fraccaroli, L. (2024). High- and low-cycle-fatigue properties of additively manufactured Inconel 625. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-023-00545-1
Mendeley helps you to discover research relevant for your work.