Physical and mechanical properties of winter first-year ice in the Antarctic marginal ice zone along the Good Hope Line

Abstract

As part of the 2019 Southern oCean seAsonal Experiment (SCALE) Winter Cruise of the South African icebreaker SA Agulhas II, first-year ice was sampled at the advancing outer edge of the Antarctic marginal ice zone along a 150km Good Hope Line transect. Ice cores were extracted from four solitary pancake ice floes of 1.83-2.95m diameter and 0.37-0.45m thickness as well as a 12×4m pancake ice floe of 0.31-0.76m thickness that was part of a larger consolidated pack ice domain. The ice cores were subsequently analysed for temperature, salinity, texture, anisotropic elastic properties and compressive strength. All ice cores from both solitary pancake ice floes and consolidated pack ice exhibited predominantly granular textures. The vertical distributions of salinity, brine volume and mechanical properties were significantly different for the two ice types. High salinity values of 12.6±4.9PSU were found at the topmost layer of the solitary pancake ice floes but not for the consolidated pack ice. The uniaxial compressive strengths for pancake ice and consolidated pack ice were determined as 2.3±0.5 and 4.1±0.9MPa, respectively. Young's and shear moduli in the longitudinal core direction of solitary pancake ice were obtained as 3.7±2.0 and 1.3±0.7GPa, respectively, and of consolidated pack ice as 6.4±1.6 and 2.3±0.6GPa, respectively. Comparing Young's and shear moduli measured in longitudinal and transverse core directions, a clear directional dependency was found, in particular for the consolidated pack ice.