Simultaneous measurement of trace dimethyl methyl phosphate and temperature using all fiber Michaelson interferometer cascaded FBG

Abstract

All fiber Michaelson interferometer cascaded fiber Bragg grating (FBG) sensor for simultaneous measurement of trace dimethyl methyl phosphate and temperature is proposed. One end of the four-core fiber (FCF) is spliced with a multimode fiber (MMF), the other end is flattened and evaporated with silver film to enhance reflection, and the Michelson interference structure is formed. The grating is engraved in the single-mode fiber (SMF) core and spliced with MMF, then the Michelson interference cascaded FBG, FBG-MMF-FCF sensor is obtained. The sensing film, MnCo 2 O 4 is coated on the surface of FCF, and the structure, elemental composition and morphology of MnCo 2 O 4 were analyzed by X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. The sensitivity and the detection limit of DMMP are 86.44 dB/ppm and 0.1767 ppb, respectively. The response/recovery time is about 14/10 s. the temperature sensitivity can be compensated and calculated as 0.069 nm/°C. The sensor has good selectivity and stability, and has a good application prospect in high sensitivity detection of trace DMMP vapor.