Modeling Shear Behavior of Woven Fabric Thermoplastic Composites for Crash Simulations

Abstract

Woven fabric thermoplastic composites possess high specific strength and stiffness along with thermoformability. To utilize the full potential of these materials to achieve better crash-safe designs in automotive structural parts, the measurement of non-linear shear behavior and its material modeling for FEM simulations is required. The standard testing method was used to measure the pure shear behavior of woven fabric composites. These results were compared with the shear behavior of material in the presence of normal stresses along the fiber direction. Tensile and compression cyclic testing of ± 45° laminate were carried out to measure the stiffness degradation and hardening of the material in the presence of tensile normal and compression normal stress. A methodology is proposed for taking into account the differences in shear behavior under different loading directions in an FEM simulation. Based on the experimental evidence, improvements in the mathematical description of plasticity and damage in continuum damage mechanics models are proposed. The model was implemented as a user-defined material subroutine (VUMAT) for Abaqus. The experimental results from coupon tests were used to verify the results of a single element simulation. Finally, a three-point bending test was used to validate the predictions of the user material model.