Sharp skirt dual-mode bandpass filter with overlay plate to control upper passband edge

1Citations
Citations of this article
1Readers
Mendeley users who have this article in their library.
Get full text

Abstract

This paper presents design and analytical model for Sharp Skirt Dual-Mode Bandpass Filter for RF receivers. Proposed filter is designed using open stub loaded H shaped resonator. Based on analytical model insertion loss S21 and return loss S11 for proposed filter are demonstrated. Inductive Overlaying plate is proposed to control upper passband edge of proposed filter to improve frequency selectivity with fixed center frequency. The proposed filter has sharp frequency selective range from 5.1GHz to 9.2GHz. With overlay plate, frequency selective range is tuned to 5.1GHz-8.6GHz. Without overlaying plate the proposed filter has return loss greater than 10dB and insertion loss of 0.7dB. Lower and upper passband edges are at 5.1GHz and 9.2GHz with attenuation level of 52dB and 54dB respectively. With overlaying plate, the filter has same S11 and S 21 parameters, but upper passband edge is shifted from 9.2GHz to 8.6GHz.

Cite

CITATION STYLE

APA

Hugar, S., Vaishali, B. M., & Baligar, J. S. (2019). Sharp skirt dual-mode bandpass filter with overlay plate to control upper passband edge. International Journal of Engineering and Advanced Technology, 8(6), 2357–2360. https://doi.org/10.35940/ijeat.F8648.088619

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free