Ultra-step-up DC-DC converter with lowvoltage stress on devices

59Citations
Citations of this article
29Readers
Mendeley users who have this article in their library.
Get full text

Abstract

This study suggests a novel ultra-step-up dc-dc converter with low normalised voltage stress across the power devices. The proposed converter incorporates the conventional boost converter with a self-lift circuit and charge pump concept and utilises a voltage multiplier cell at the output side. In the input side, two inductors are magnetised during the switch on-time. During the switch off-time, the stored energy in these inductors, charge pump capacitor and input source, is delivered to the load. Accordingly, the proposed converter is capable of providing high voltage gains with a small duty cycle. Besides, the voltage stress across the power devices is low. Therefore, the MOSFET switch with low RDS-on and devices with reduced nominal voltage can be used which in turn reduces the conduction and turn-on losses. The analysis of the voltage and current stresses is accomplished. The circuit performance is compared with other solutions in the literature in terms of voltage gain and normalised voltage stress of the semiconductors. Eventually, to validate the theoretical analysis, the experimental results are given.

Cite

CITATION STYLE

APA

Jalilzadeh, T., Rostami, N., Babaei, E., & Maalandish, M. (2019). Ultra-step-up DC-DC converter with lowvoltage stress on devices. IET Power Electronics, 12(3), 345–357. https://doi.org/10.1049/iet-pel.2018.5356

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free