Adsorption of fluoride from industrial wastewater using polymer adsorbents: A review

Abstract

Fluoride pollution in ground and surface water originates from naturally occurring reactions and industrial activities such as the disposal of industrial wastewater. Amongst different fluoride removal technologies including chemical precipitation, membrane filtration, ion exchange processes, and electrodialysis, adsorption is an attractive method for fluoride removal from wastewater due to its low operational cost, simplicity, and good sustainability. Various adsorbents are used for fluoride removal including, metal oxides and hydroxide, carbonaceous adsorbents, zeolite, polysaccharides, and polyresin adsorbents. This review studies the application of modified polysaccharides and polyresin adsorbents for the removal of fluoride from wastewater. The relationship between the adsorption conditions and the resulting adsorption capacity is thoroughly discussed. Based on the reported studies, modified polysaccharides and polyresins adsorbents can effectively remove fluoride from wastewater achieving high adsorption capacity, the highest being 92.39 mg/g for aluminum impregnated amberlite at pH 3. Furthermore, aluminum impregnated adsorbents reported a higher fluoride adsorption capacity than other modification methods where the three adsorbents with the highest fluoride adsorption capacity are: aluminum impregnated amberlite 92.39 mg/g at pH 3> zirconium immobilized crossed linked chitosan 48.26 mg/g at pH 6 > chitosan/aluminum hydroxide beads 17.68 mg/g at pH 4. In addition, polymeric adsorbents are also highly sustainable as they can be regenerated multiple times to be reused. Therefore, the high adsorption capacity and good regeneration potential allow polymeric adsorbents to serve as promising and sustainable adsorbents to remove fluoride from industrial wastewater.