Corrosion resistance of aisi 304 stainless steel modified both femto-and nanosecond lasers

Abstract

This article is aimed to study the effect of laser treatment of AISI 304 stainless steel on the corrosion resistance and chemical composition of the surface layer. The samples were irradiated using two quite different laser sources: IPG Yb:glass fibre laser (τ = 230 ns, λ = 1062 nm) and Trumpf TruMicro Series 2020 fiber laser (τ = 260 fs–20 ps, λ = 1030 nm) that is, in both the long and ultrashort pulse duration regime. It allowed the observation of completely different microstructures and chemical composition of the surface layer. In this study, the morphology of the samples was accessed using both Keyence digital microscope and Olympus Lext 5000 profilometer. The corrosion resistance was examined in 3% NaCl solution using both potentiodynamic measurement and Electrochemical Impedance Spectroscopy. In order to examine the change in chemical composition of the surface layer, the X-ray photoelectron spectroscopy study was performed. Results show that the use of a long laser pulse contributes to the formation of a thin, tight, rich in chromium passive layer, which significantly improves corrosion resistance in comparison to the reference sample. Different behaviour is observed after irradiation with an ultra-short pulse duration laser.