Single and dual metal oxides as promising supports for carbon monoxide removal from an actual syngas: The crucial role of support on the selectivity of the au–cu system

Abstract

A catalytic screening was performed to determine the effect of the support on the performance of an Au–Cu based system for the removal of CO from an actual syngas. First, a syngas was obtained from reforming of ethanol. Then, the reformer outlet was connected to a second reactor, where Au–Cu catalysts supported on several single and dual metal oxides (i.e., CeO2, SiO2, ZrO2, Al2O3, La2O3, Fe2O3, CeO2-SiO2, CeO2-ZrO2, and CeO2-Al2O3) were evaluated. AuCu/CeO2 was the most active catalyst due to an elevated oxygen mobility over the surface, promoting CO2 formation from adsorption of C–O* and OH− intermediates on Au0 and CuO species. However, its lower capacity to release the surface oxygen contributes to the generation of stable carbon deposits, which lead to its rapid deactivation. On the other hand, AuCu/CeO2-SiO2 was more stable due to its high surface area and lower formation of formate and carbonate intermediates, mitigating carbon deposits. Therefore, use of dual supports could be a promising strategy to overcome the low stability of AuCu/CeO2. The results of this research are a contribution to integrated production and purification of H2 in a compact system.