Time-Dependent Rheological Behavior and MPS Simulation of Cement–Bentonite Slurries with Hydration Accelerators for Borehole Backfilling Applications

Abstract

This study investigates cement–bentonite slurries with hydration accelerators for borehole backfilling applications in infrastructure reconstruction projects. Two formulations with different accelerator dosages (5 and 10 kg/m3) were evaluated through combined experimental testing and Moving Particle Semi-implicit (MPS) numerical modeling to optimize material performance. The research focuses on time-dependent rheological evolution and its impact on construction performance, particularly bleeding resistance and workability retention. Experimental flow tests revealed that both formulations maintained similar initial flowability (240–245 mm spread diameter), but the higher accelerator dosage resulted in 33% flow reduction after 60 min compared to 12% for the lower dosage. Bleeding tests demonstrated significant improvement in phase stability, with bleeding rates reduced from 2.5% to 1.5% when accelerator content was doubled. The MPS framework successfully reproduced experimental behavior with prediction accuracies within 3%, enabling quantitative analysis of time-dependent rheological parameters through inverse analysis. The study revealed that yield stress evolution governs both flow characteristics and bleeding resistance, with increases several hundred percent over 60 min while plastic viscosity remained relatively constant. Critically, simulations incorporating time-dependent viscosity changes accurately predicted bleeding behavior, while constant-viscosity models overestimated bleeding rates by 60–130%. The higher accelerator formulation (10 kg/m3) provided an optimal balance between initial workability and long-term stability for typical borehole backfilling operations. This integrated experimental–numerical approach provides practical insights for material optimization in infrastructure reconstruction projects, particularly relevant for aging infrastructure requiring proper foundation treatment. The methodology offers construction practitioners a robust framework for material selection and performance prediction in borehole backfilling applications, contributing to improved construction quality and reduced project risks.