Calorific value and ash content of extracted birch bark

Abstract

Wood bark is one of the main residues in the forest industry worldwide. Currently, the bark is used to produce process heat and energy. A major amount of this is mainly used in power and heating plants. Due to the fact that the demand for heating energy is seasonal, the storage of bark is necessary. The storage process of bark and therefore related problems (like biomass loss, increase of ash content etc.) were discussed in previous studies. Different approaches to increase the economic and ecologic value of wood bark through gaining extractives from the bark were investigated in order to revalue this by-product as well. This study shows the change in calorific value and ash content of birch bark based on results of ultrasound-assisted extraction (UAE). Regarding the energy content (gross calorific value), a comparison was made that showed that due to the extraction process, the energy content of the birch bark is decreased. The extraction yield of the methanol extracts results as 17.74%. The total phenolic content (TPC) of this extract was 447.75 mg GAE/g of oven-dried bark extracts. The amount of ash increased by 23.74% after the extraction. The gross calorific value of the birch bark decreased by 6.98%. The calculated energy content decreased from 2.48 MWh/m3 before extraction to 1.61 MWh/m3 after extraction, which is a loss of 35.08%. The obtained results show that through the extraction of birch bark via ultrasound-assisted extraction, valuable substances can be produced. At the same time, the ash content of extracted birch bark increased whereas the energy content decreased.