Biofilter, dynamic modeling software characterizing contaminant removal via biofiltration, was used in the preliminary design of a biofilter to treat odorous hydrogen sulfide (H2S). Steady-state model simulations were run to generate performance plots for various influent concentrations, loadings, residence times, media sizes, and temperatures. Although elimination capacity and removal efficiency frequently are used to characterize biofilter performance, effluent concentration can be used to characterize performance when treating to a target effluent concentration. Model simulations illustrate that, at a given temperature, a biofilter cannot reduce H2S emissions below a minimum value, no matter how large the biofilter or how long the residence time. However, a higher biofilter temperature results in lower effluent H2S concentrations. Because dynamic model simulations show that shock loading can significantly increase the effluent concentration above values predicted by the steady-state model simulations, it is recommended that, to consistently meet treatment objectives, dynamic feed conditions should be considered. This study illustrates that modeling can serve as a valuable tool in the design and performance optimization of biofilters. © 2004 Air & Waste Management Association.
CITATION STYLE
Martin, R. W., Mihelcic, J. R., & Crittenden, J. C. (2004). Design and performance characterization strategy using modeling for biofiltration control of odorous hydrogen sulfide. Journal of the Air and Waste Management Association, 54(7), 834–844. https://doi.org/10.1080/10473289.2004.10470955
Mendeley helps you to discover research relevant for your work.