Optimization of Fused Deposition Modeling (FDM) Process for Small-Scale PEEK Medical Devices

Abstract

Additive manufacturing (AM) of polyetheretherketone (PEEK) offers a promising route for producing lightweight, biocompatible, and patient-specific medical implants with complex geometries. This study investigates and optimizes fused deposition modeling (FDM) parameters for fabricating small-scale PEEK medical components with improved dimensional accuracy and surface quality. PEEK’s high processing temperature and thermal contraction make precision printing of fine features challenging. A Taguchi design of experiments (L9 orthogonal array) was employed to assess the effects of nozzle temperature, layer height, printing speed, and extrusion width on dimensional deviation and surface roughness using 5 × 5 × 5 mm cube specimens. Dimensional accuracy was quantified along the horizontal and vertical axes, and surface roughness was measured using a stylus profilometer. Statistical analysis showed layer height was the most significant factor affecting horizontal accuracy (p = 0.0225), while printing speed most strongly influenced vertical deviation. The optimal parameters, 450 °C nozzle temperature, 0.06 mm layer height, 7.5 mm/s printing speed, and 0.4 mm extrusion width, achieved mean deviations of 0.013 mm (horizontal) and 0.049 mm (vertical) with a surface roughness of 4.01 µm. Validation using a benchmark model and micro-computed tomography confirmed improved reproduction of small features under these conditions. The results demonstrate that precise control of FDM parameters enables accurate fabrication of sub-millimeter PEEK structures suitable for medical device applications.