Effect of substrate sodium content on crystallization and photocatalytic activity of TiO2 films prepared by DC magnetron sputtering

26Citations
Citations of this article
41Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The effect of sodium content of the glass support on the crystallinity of sputtered TiO 2 films and photocatalytic breakdown of ethanol has been studied. It was found that the activity of the as-deposited (amorphous) films does not depend on the type of support used. The chemical composition of the glass support does influence the activity of annealed films. When using soda-lime glass support sodium diffuses into the film upon annealing, suppressing anatase crystallization and decreasing its photocatalytic activity. To decrease the influence of sodium, soda-lime glass coated with an e-beam evaporated SiO 2 barrier layer was used with good result. A reduced sodium concentration in the film leads to well crystallized anatase after annealing. An increased photocatalytic activity was observed for these films.

Cite

CITATION STYLE

APA

Tomaszewski, H., Eufinger, K., Poelman, H., Poelman, D., De Gryse, R., Smet, P. F., & Marin, G. B. (2007). Effect of substrate sodium content on crystallization and photocatalytic activity of TiO2 films prepared by DC magnetron sputtering. International Journal of Photoenergy, 2007. https://doi.org/10.1155/2007/95213

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free