Surface dose measurement with Gafchromic EBT3 film for intensity modulated radiotherapy technique

7Citations
Citations of this article
11Readers
Mendeley users who have this article in their library.

Abstract

Accurate dose measurement in the buildup region is extremely difficult. Studies have reported that treatment planning systems (TPS) cannot calculate surface dose accurately. The aim of the study was to compare the film measurements and TPS calculations for surface dose in head and neck cancer treatment using intensity modulated radiation therapy (IMRT). IMRT plans were generated for 5 head and neck cancer patients by using Varian Eclipse TPS. Quality assurance (QA) plans of these IMRT plans were created on rando phantoms for surface dose measurements. EBT3 films were cut in size of 2.5 x 2.5 cm2 and placed on the left side, right side and the center of larynx and then the films were irradiated with 6 MV photon beams. The measured doses were compared with TPS. The results of TPS calculations were found to be lower compared to the EBT3 film measurements at all selected points. The lack of surface dose calculation in TPS should be considered while evaluating the radiotherapy plans.

Cite

CITATION STYLE

APA

Akbas, U., Kesen, N. D., Koksal, C., Okutan, M., Demir, B., & Becerir, H. B. (2017). Surface dose measurement with Gafchromic EBT3 film for intensity modulated radiotherapy technique. In EPJ Web of Conferences (Vol. 154). EDP Sciences. https://doi.org/10.1051/epjconf/201715401011

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free