Penetration performance and fragmentation mechanism behind target of tungsten fibre/zirconium-based bulk metallic glass matrix composite rod

27Citations
Citations of this article
2Readers
Mendeley users who have this article in their library.
Get full text

Abstract

A tungsten fibre/zirconium-based bulk metallic glass matrix composite (WF/Zr-MG) is a type of armour piercing material with significant development potential. When it penetrates a finite-thickness target plate, it results in damage different from those generated by W alloys. Therefore, the penetration of 80% WF/Zr-MG by volume fraction (the diameter of the W fibre is 0.3 mm) into a 120-mm-thick 45 steel target plate is investigated experimentally at an impact velocity of 1600 ± 20 m/s. Subsequently, the results are comp rod ared with those of a 91 Walloy (91 W) rod to investigate the penetration performance and damage ability behind the target of composite materials. The damage effects of the 45 steel target plate and after-effect target are analysed. The penetration performance and fragmentation mechanism of the two materials are analysed experimentally and based on theoretical calculations. The experimental results indicate that the WF/Zr-MG rod shows self-sharpening in the nose, a smaller average crater diameter, less kinetic energy loss, and better penetration performance compared with the 91 W rod. The bonding force between the phases of WF/Zr-MG is significantly lower than that of 91 W, and cracks formed easily in the material during the penetration process. Radial stress is released instantaneously after the WF/Zr-MG rod departs from the target; consequently, the WF/Zr-MG rod underwent radial expansion, fracture, and dispersion. The damaged areas of WF/Zr-MG measured 1734 and 1661 cm2, which exhibit fragment diffusion angles of 46.5° and 46.1°, respectively. However, the damaged areas of the W alloy are only 1017 and 1193 cm2, and the corresponding fragment diffusion angles are only 35.3° and 37.8°, respectively. The damage parameters of WF/Zr-MG behind the target are greater than those of the tungsten alloy, which increased its killing capacity behind the target.

Cite

CITATION STYLE

APA

Zhou, F., Du, C., Cheng, C., Xu, L., Du, Z., Gao, G., … Fu, H. (2023). Penetration performance and fragmentation mechanism behind target of tungsten fibre/zirconium-based bulk metallic glass matrix composite rod. International Journal of Refractory Metals and Hard Materials, 112. https://doi.org/10.1016/j.ijrmhm.2023.106160

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free