An autonomous real-time detector system for radionuclide monitoring in drinking water systems

2Citations
Citations of this article
17Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

For monitoring radioactive contamination of water systems due to nuclear accidents or terrorist attacks, there is need of an in situ online measurement to assess alpha-, beta- and gamma-emitting radionuclide contaminants quickly and accurately. However, there is no well-established online monitoring system for permanent surveillance of drinking water systems. Therefore, a real-time measurement system was developed based on the readout of plastic scintillator sheets by a photomultiplier. Direct contact between scintillator and streaming water allows for the detection of both long- and short-ranged particles. Using a passive cooling system, detection limits of 141 Bq/L for 241Am, 20 Bq/L for 60Co and 17 Bq/L for 137Cs were achieved with measurements of 60 s counting time. The system has been designed to be operated safely without deep knowledge of radiation measurement technology. The detector can be connected as a bypass to a water system and be operated in a continuous online survey mode, making it applicable as an early warning system.

Cite

CITATION STYLE

APA

Drinhaus, J., Harstrick, A., & Breustedt, B. (2021). An autonomous real-time detector system for radionuclide monitoring in drinking water systems. SN Applied Sciences, 3(2). https://doi.org/10.1007/s42452-021-04181-8

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free