Possibilities of limiting migration of natural gas in boreholes in the context of laboratory studies

Abstract

Gas migration through fresh and hardened cement slurry is an ongoing problem in the oil industry. In order to eliminate this unfavourable phenomenon, research is being conducted on new compositions of slurries for gas wells. The article presents the results of research for slurries with low and high resistance to gas migration. The proper selection of the quantity and quality of components makes it possible to design slurry with the required static structural strength values. In addition, the cement sheath of such anti-migration slurry has low porosity and a very low proportion of large pore spaces. Additionally, the mechanical parameters do not decrease during long-term deposition in borehole-like conditions. By obtaining these results, it was possible to design slurry whose cement sheath has high corrosion resistance. The new slurry has a lower water-cement ratio. Additionally, GS anti-migration copolymer, anti-filter additive and latex are used. The presence of n-SiO2 aqueous solution and microcement allows for sealing the microstructure of the hardened cement slurry. Such modifications significantly improve the technological parameters of the cement slurry and the cement coat formed from it.