Study of ice accretion on horizontal axis wind turbine blade using 2d and 3d numerical approach

Abstract

In order to optimize the wind turbine operation in ice prone cold regions, it is important to better understand the ice accretion process and how it affects the wind turbine performance. In this paper, Computational Fluid Dynamics (CFD) based 2D and 3D numerical techniques are used to simulate the airfiow/droplet behaviour and resultant ice accretion on a 300 kW wind turbine blade. The aim is to better understand the differences in the flow behaviour and resultant ice accretion between both approaches, as typically the study of ice accretion on the wind turbine blade is performed using simple 2D simulations, where the 3D effects of flow (air & droplet) are ignored, which may lead to errors in simulated ice accretion. For 2D simulations, nine sections along a 300 kW wind turbine blade are selected, whereas for 3D study, a full-scale blade is used. The obtained results show a significant difference in the ice accretion for both approaches. Higher ice growth is observed in 2D approach when compared with the full-scale 3D simulations. CFD simulations are carried out for three different icing conditions (typical, moderate and extreme), in order to estimate the extent of differences the different operating conditions can introduce on the ice accretion process in the 2D and the 3D simulations. Complex ice shapes are observed in case of extreme ice conditions, which affect the aerodynamic performance of the blade differently from typical and moderate ice conditions.