Si1–xGex anode synthesis on plastic films for flexible rechargeable batteries

Abstract

SiGe is a promising anode material for replacing graphite in next generation thin-film batteries owing to its high theoretical charge/discharge capacity. Metal-induced layer exchange (LE) is a unique technique used for the low-temperature synthesis of SiGe layers on arbitrary substrates. Here, we demonstrate the synthesis of Si1−xGex (x = 0–1) layers on plastic films using Al-induced LE. The resulting SiGe layers exhibited high electrical conductivity (up to 1200 S cm−1), reflecting the self-organized doping effect of LE. Moreover, the Si1−xGex layer synthesized by the same process was adopted as the anode for the lithium-ion battery. All Si1−xGex anodes showed clear charge/discharge operation and high coulombic efficiency (≥ 97%) after 100 cycles. While the discharge capacities almost reflected the theoretical values at each x at 0.1 C, the capacity degradation with increasing current rate strongly depended on x. Si-rich samples exhibited high initial capacity and low capacity retention, while Ge-rich samples showed contrasting characteristics. In particular, the Si1−xGex layers with x ≥ 0.8 showed excellent current rate performance owing to their high electrical conductivity and low volume expansion, maintaining a high capacity (> 500 mAh g–1) even at a high current rate (10 C). Thus, we revealed the relationship between SiGe composition and anode characteristics for the SiGe layers formed by LE at low temperatures. These results will pave the way for the next generation of flexible batteries based on SiGe anodes.