Seleção de eletrodos para caracterização elétrica de Y-BaCeO3 contendo ZnO como aditivo de sinterização

Abstract

This work deals with the choice of electrodes for realizing the electrical characterization of Yttrium doped-BaCeO3 sample which contains ZnO as sintering aid. The sintering occurred through liquid phase. It were used platinum and silver pastes which curing temperatures are 1100 °C and 750 °C, respectively. Scanning electron microscopy characterization of sample-electrode interfaces showed that during the curing of the platinum paste, due to the high temperature, occurred phase exudation which remained between the primary sample surface and electrode. Consequently, electrical characterization by impedance spectroscopy detected additional polarization at interface sample-electrode becoming non-veracious the electrical resistivity values of the material under analysis. No additional polarization was detected for silver electrodes due to the lowest curing temperature.