NextGenPower - Demonstration and component fabrication of nickel alloys and protective coatings for steam temperatures of 750°C

Abstract

The EU NextGenPower-project aims at demonstrating Ni-alloys and coatings for application in high-efficiency power plants. Fireside corrosion lab and plants trials show that A263 and A617 perform similar while A740H outperforms them. Lab tests showed promising results for NiCr, Diamalloy3006 and SHS9172 coatings. Probe trials in six plants are ongoing. A617, A740H and A263 performed equally in steamside oxidation lab test ≤750°C while A617 and A740H outperformed A263 at 800°C; high pressure tests are planned. Slow strain rate testing confirmed relaxation cracking of A263. A creep-fatigue interaction test program for A263 includes LCF tests. Negative creep of A263 is researched with gleeble tests. A263 Ø80 - 500mm trial rotors are forged with optimized composition. Studies for designing and optimizing the forging process were done. Segregation free Ø300 and 1,000mm rotors have been forged. A263 - A263 and A293 - COST F rotor welding show promising results (A263 in precipitation hardened condition). Cast step blocks of A282, A263 and A740H showed volumetric cracking after heat treatment. New 'as cast' blocks of optimized composition are without cracks. A 750°C steam cycle has been designed with integrated C02 capture at 45% efficiency (LHV). Superheater life at ≤750°C and co-firing is modeled. Copyright © 2014 Electric Power Research Institute, Inc. Distributed by ASM International®. All rights reserved.