Optimization and standardization of an enzyme-linked immunosorbent assay protocol for serodiagnosis of Actinobacillus pleuropneumoniae serotype 5

Abstract

An indirect enzyme-linked immunosorbent assay protocol has been optimized with special emphasis given to assay standardization and quality control. Technical aspects such as choice of a microplate, antigen immobilization, buffer composition, optimal screening dilution of sera, and kinetics of the enzymatic reaction were studied and evaluated in order to design a standard protocol offering maximal analytical sensitivity and specificity, as well as to obtain minimal within- and between-plate variability. Among the 27 plates tested, the Nunc 475-094 and 269-620 immunoplates were found to be the best in terms of high positive-to-negative ratio and low variability. No significant differences in antigen immobilization were found by using buffers of various compositions or pHs; however, the presence of magnesium ions (Mg2+; 0.02 M) resulted in a twofold increase in nonspecific background. An optimal screening dilution of sera was established at 1:200. A 1-h incubation period for test serum was found to be optimal. Maximum enzymatic activity for peroxidase was obtained by adjusting both substrate (H2O2) and hydrogen donor [2,2'-azinobis(3-ethylbenz-thiazoline sulfonic acid)] concentrations to 4 and 1 mM, respectively. To control between-plate variability, a timing protocol was adopted. Within-plate variability was also controlled by using a sample placement configuration pattern. Sliding scales were determined by repeated testing of a cross section of samples to set acceptance limits for both within- and between-plate variability. These limits were used in a quality control program to monitor assay performance. The results obtained suggest that this standardized protocol might be useful in the serodiagnosis of Actinobacillus pleuropneumoniae serotype 5.