A temperature-insensitive resonant pressure micro sensor based on silicon-on-glass vacuum packaging

15Citations
Citations of this article
7Readers
Mendeley users who have this article in their library.

Abstract

This paper presents a temperature-insensitive resonant pressure sensor, which is mainly composed of a silicon-on-insulator (SOI) wafer for pressure measurements and a silicon-on-glass (SOG) cap for vacuum packaging. The variations of pressure under measurement bend the pressure sensitive diaphragm and regulate the intrinsic frequencies of the resonators in the device layer. While, variations of temperature cannot significantly change the intrinsic frequencies of the resonators, due to the SOG cap to offset generated thermal stress. Numerical simulations, based on finite element analysis, were conducted to calculate the residual thermal stress and optimize the sensing structures. Experimental results show that the Q-factors of the resonators are higher than 16,000, with a differential pressure sensitivity of 11.89 Hz/kPa, a nonlinearity of 0.01% F.S and a low fitting error of 0.01% F.S with the pressure varying from 100 kPa to 1000 kPa. In particular, a temperature sensitivity of ~1 Hz/◦C was obtained in the range of −45◦C to 65◦C, which is one order of magnitude lower than the previously reported counterparts.

Cite

CITATION STYLE

APA

Yan, P., Lu, Y., Chen, J., Xiang, C., Wang, J., & Chen, D. (2019). A temperature-insensitive resonant pressure micro sensor based on silicon-on-glass vacuum packaging. Sensors (Switzerland), 19(18). https://doi.org/10.3390/s19183866

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free