Morphometric feature description of the proximal ulna based on quantitative measurement: a key consideration for implant design

Abstract

Purpose: To perform quantitative measurements of the anatomic morphology of the proximal ulna and establish the morphologic references based on Chinese for the surgical protocol and implant design. Methods: The computed tomography data of 156 upper extremities were involved in this study. The ulna model was reconstructed in Mimics. Ten distance and 6 angle parameters were measured by 4 independent investigators with a new quantitative measurement method. The intraclass correlation coefficient was used to evaluate the measuring reliability. Gender and side differences of measured parameters were evaluated. Results: Measurements showed a mean coronoid height of 15 mm, which was 42% of ulnar height with gender-specific differences (mean 16 mm in men and 14 mm in women, P < 0.001). A mean unsupported anteromedial facet width of 8 mm was 61% of the coronoid anteromedial facet. A larger opening angle correlates to a larger olecranon-diaphysis angle (P < 0.001) and larger coronoid height (P = 0.001). A mean proximal ulna dorsal angulation of 4.7° is present in 80% of models at an average of 52 mm distal to olecranon tip. The average proximal ulna varus angulation was 16° at a mean of 74 mm distal to the olecranon tip. Morphological features between the left and right sides were highly consistent. The ICC was between 0.789 and 0.978 for inter-observer and between 0.696 and 0.997 for intra-observer reliability. Conclusions: The proximal ulna features variable morphology but minor side differences among individuals. Over half of the anteromedial facet was not supported by the proximal ulnar diaphysis, making the coronoid vulnerable to elbow trauma. Preconditioning or customized design of the ulnar plate in the clinical setting with the help of contralateral morphology may be a good choice.