Calculation of the effective bearing contact radius for precision tightening of bolted joints

Abstract

Torque control is usually the only method for tightening bolts in some precision assembly applications. However, the scatter of the torque-tension relationship may significantly decrease the accuracy of the preload, which conflicts with the high requirement for mechanical accuracy in such precision assemblies. An important, but often ignored, factor affecting the accuracy of the torque-tension relationship is the effective bearing contact radius. In this article, a three-dimensional finite element model of a typical bolted joint was developed to obtain the actual bearing pressure distribution, based on which the effective bearing contact radius can be further calculated. Then, a parametrical study was conducted to systematically investigate the effects of various geometrical, material, and frictional factors on the effective bearing contact radius. Based on the numerical results, a comprehensive and quantitative evaluation of the relative accuracy of each traditional method of calculating the effective bearing contact radius was made. In particular, it was found that the effective bearing contact radius, calculated based on the assumption of uniform bearing pressure distribution, was always relatively accurate regardless of the geometrical, material, and frictional conditions considered. This study will be helpful in increasing the accuracy of preload, thus ensuring mechanical accuracy and quality for precision assemblies.