Effect of retained austenite on the yielding and deformation behavior of a dual phase steel

Abstract

Tensile tests were conducted on a vanadium containing dual phase steel at temperatures between -53 and + 187°C to determine the effect of retained austenite stability on tensile properties. The transformation of retained austenite to martensite with stress/strain was shown to be a contributing factor in the yielding and strain hardening behavior of the dual phase steel. Increasing the stability of the austenite, by increasing the test temperature, caused the expected shift in the austenite to martensite strain transformation to higher strains. This led to a lower initial strain hardening exponent which increased with strain, compared to the ambient and sub-zero temperature deformation where the initial strain hardening exponent was higher but decreased with strain. The former behavior, which accentuated the strain hardening ability at higher strains, led to an increase in the uniform and total elongations, suggesting that the ductility of dual phase steels can be further improved by optimizing the stability of the retained austenite. © 1983.