Ion-pair chromatography of polythionates and thiosulfate with detection based on their catalytic effects on the postcolumn azide-iodine reaction

Abstract

The reduction of iodine with azide, catalyzed by polythionates (tri-, tetra-, penta- and hexathionate) and thiosulfate, has been utilized as a postcolumn reaction for chromatographic determination of these sulfur oxyanions. The method is based on the separation of polythionates and thiosulfate on an octadecylsilica column with an acetonitrile-water (20:80, v/v) mobile phase (pH 5.0) containing 3 mM tetrapropylammonium hydroxide and 6 mM acetic acid, followed by photometric measurement of the residual iodine (as triiodide) from the catalytic postcolumn azide-iodine reaction after mixing a reaction solution containing azide and iodine with the column effluent. Chromatograms obtained for the sulfur oxyanions showed negative peaks as a result of the decrease in absorbance of background. The conditions for the catalytic postcolumn reaction of the sulfur oxyanions in the column effluents were established by varying the concentrations of azide, iodine, iodide and acetic acid in the reaction solution, and varying the flow-rate, reaction temperature and length of the reaction tube. The detection limits (defined as S/N=3) were 4.3 μM for trithionate, 0.10 μM for tetrathionate, 2.7 nM for pentathionate, 5.0 nM for hexathionate and 1.1 nM for thiosulfate. When compared with earlier methods, the proposed method gave a much higher sensitivity for the determination of two polythionates (penta- and hexathionate) and thiosulfate. This method was applied successfully to the analysis of polythionates and thiosulfate added to hot-spring water samples. © 2001 Elsevier Science B.V.