Electrolyte-Dependent Sodium Plating for Anode-Free Na-Ion Batteries Studied by Operando Optical Microscopy

Abstract

Anode-free sodium ion batteries (SIBs) promise higher energy density and lower costs, by eliminating the need for an anode host material; however, achieving efficient Na plating/stripping remains a major challenge. Here, three electrolyte classes − carbonate-based, glyme-based, and a localized high-concentration electrolyte−are evaluated for Na plating/stripping on a commercial carbon-coated aluminium current collector. Measurements across a broad temperature and current range (−30°C–+60°C, 0.25–14 mA cm−2−) and studies on the Na growth modes by operando optical microscopy reveal the superior behavior of the glyme-based electrolyte, including a uniform crystalline metal deposition. In anode-free full cells with Na4Fe3(PO4)2P2O7 as cathode, this electrolyte enables superior cycling with 75.3% capacity retention over 400 cycles at areal loadings above 3 mAh cm−2−. Projected energy densities of 290 Wh/kg and 751 Wh/l are calculated at the cell-stack level, exceeding current LiFePO4-based Li-ion batteries. The excellent Na plating/stripping behavior is evidenced by a particularly low initial areal capacity loss (IACL, mAh cm−2). The IACL parameter represents the first cycle Na inventory loss that must be compensated by the cathode. Unlike for conventional Na-ion cells with traditional anodes, the IACL is a constant for anode-free cells. For the given cell, the IACL amounts to only 0.14–0.16 mAh cm−2 (~5% of the 3 mAh cm−2 cathode areal capacity). This highlights the potential of anode-free SIBs using commercially available components.