Mechanical Behavior of Differently Oriented Electron Beam Melting Ti-6Al-4V Components Using Digital Image Correlation

Abstract

Mechanical properties of additive manufactured metal components can be affected by the orientation of the layer deposition. In this investigation, T-6Al-4V cylindrical specimens were fabricated by electron beam melting (EBM) at four different build angles (0 deg, 30 deg, 60 deg, and 90 deg) and tested as per ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials. With the layer-by-layer fabrication suggesting granting anisotropic properties to the builds, strain fields were recorded by digital image correlation (DIC) in the search for shear effects under uniaxial loads. For the validation of this measuring method, axial strains were measured with a clip extensometer and a virtual extensometer, simultaneously. Failure analysis of the specimens at different orientations was conducted to evidence the recording of shear strain fields. The failure analysis included fractography, optical micrographs of the microstructure distribution, and failure profiles displaying different failure features associated with the layering orientation. Additionally, an experimental study case of how the failure mode of components can potentially be designed from the fabrication process is presented. At the end, remarks about the shear effects found, and an insight of the possibility of designing components by failure for safer structures are discussed.