Directivity Enhancement of a Broadband Printed Antenna by Using Two Closely Spaced Strips

Abstract

The bandwidth of a printed rectangular loop antenna with two gaps can be enlarged by using the metallic strips as directors. However, the directivity is not good. Because the two closely spaced metallic strips act as a building block, they can be used to block the propagation of electromagnetic waves. Therefore, two closely spaced metallic strips as a new reflector are adopted and investigated in this paper for improving the directivity of antenna. Two arrangement modes of the printed antennas with two closely spaced strips are designed, fabricated, and measured. Experimental results show that the impedance bandwidth of type A antenna (with inner strip) is about 62.5% ranging from 2.3 to 4.39 GHz. In addition, the gain of 3.8-5.2 dBi and 2 dB improvement of F/B ratio are achieved. Type B antenna (with outer strip) can realize a 62% measured bandwidth ranging from 2.29 to 4.35 GHz. Also, about 3.4 to 4.9 dBi of gain with 2.5 dB improvement of F/B ratio is obtained. The measured F/B ratios of the two modified antennas are both better than 10 dB within the operating frequency band. Measured results verified that adopting the two closely spaced metallic strips as a new reflector can both enhance the F/B ratio and gain without changing the overall dimensions and operating frequency.