Assessment Processes to Increase the Burden of Existing Buildings Using BIM

Abstract

The process of implementation of the reconstruction of buildings is often associated with the need to adapt them to increased loads. In the restricted access to the archive project documentation it is necessary to use technical solutions to obtain a fairly short period of time necessary to implement the technical parameters of such processes. Dissemination of BIM in the design process can also be used effectively in the processes of identification of existing facilities for the implementation of the work of strengthening or adapting objects to the increased load requirements. Obtained in the process of research and macroscopic data is then used in the processes of numerical processing aimed at developing a numerical model reflects the actual parameters of the structure of the existing structure and, therefore, allows a better look at the object and the execution of the process to strengthen future. This article will identify possibilities for the use of BIM in processes of identification technology buildings and structures and indicated the necessary data to be obtained during the preliminary work. Introduced in model solutions enable the use of multi-criteria analysis of the choice of the most optimal solutions in terms of costs or expenditures of time during the process of construction. Taking the above work by building a numerical model of the object allows every step of verification by authorized person inventoried solutions and enables tracking and changes in the situation of those found derogations in relation to the parameters established at the primary stage. In the event of significant deviations, there is the possibility of rapid changes to the completed process of calculation and presentation of alternative solutions. Availability software using BIM technology is increasingly common here knowledge of the implementation of such solutions will become in a short time, the standard for most objects or engineering structures. The use of modern solutions using the described processes will be discussed on the example of an industrial facility where there was a need for installation of new equipment and adapt it to the technical parameters.