Experimental procedures for the mechanical characterization of composite reinforced mortar (CRM) systems for retrofitting of masonry structures

Abstract

Fiber-reinforced composites can be arranged in the form of bi-dimensional grids and employed as internal reinforcement of mortar plasters to realize composite reinforced mortar (CRM) systems. Recently, CRM were applied as externally bonded reinforcement of existing masonry members showing promising improvements of load-carrying and deformation capacities. However, since CRM systems are still in their infancy, limited research is available regarding their mechanical properties and their bond behavior with respect to masonry substrates. In this paper, a series of experimental tests are performed on a CRM system comprising a glass fiber-reinforced composite grid and a lime-based matrix. Namely, tensile tests of bare grid yarns and of CRM coupons, shear tests of grid joints, and single-lap direct shear tests of CRM-masonry joints were performed. These tests are aimed at providing a comprehensive mechanical characterization of the CRM, which results can be used to design strengthening applications with this system. Namely, the tensile properties of bare grid yarns in warp and weft direction are obtained and compared with those of CRM coupons tested following the indications of the Italian and U.S. acceptance criteria for inorganic-matrix composites. Furthermore, the grid joints are subjected to shear tests to determine if the yarns orthogonal to the applied load direction provide a contribution to the system load-carrying capacity. Finally, CRM-masonry joints are subjected to single-lap direct shear tests to study the CRM bond behavior. This work provides an insight on the behavior of CRM that can be useful to formulate reliable design procedures for these systems.