Abstract
A circularly polarized patch antenna for future fifth-generation mobile phones is presented in this paper. Miniaturization and beamwidth enhancement of a patch antenna are the two main areas to be discussed. By folding the edge of the radiating patch with loading slots, the size of the patch antenna is 44.8% smaller than a conventional half wavelength patch, which allows it to be accommodated inside handsets easily. Wide beamwidth is obtained by surrounding the patch with a dielectric substrate and supporting the antenna by a metallic block. A measured half power beamwidth of 124° is achieved. The impedance bandwidth of the antenna is over 10%, and the 3-dB axial ratio bandwidth is 3.05%. The proposed antenna covers a wide elevation angle and complete azimuth range. A parametric study of the effect of the metallic block and the surrounding dielectric substrate on the gain at a low elevation angle and the axial ratio of the proposed antenna are presented.
Author supplied keywords
Cite
CITATION STYLE
Mak, K. M., Lai, H. W., Luk, K. M., & Chan, C. H. (2014). Circularly polarized patch antenna for future 5G mobile phones. IEEE Access, 2, 1521–1529. https://doi.org/10.1109/ACCESS.2014.2382111
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.