FEM micromechanical modeling of nanocomposites with carbon nanotubes

Abstract

Mechanical properties of carbon nanotube (CNT)-based nanocomposites are broadly discussed in the literature. The influence of CNT arrangements on the elastic properties of nanocomposites based on the finite-element method (FEM) and representative volume element (RVE) approach is presented here. This study is an application of RVE modeling in the characterization of elastic behavior of CNT polymer nanocomposites. Our main contribution is the analysis of the impact of a nanotube arrangement on the elastic properties of nanocomposite to comprehensively determine the material constants. While most of the articles are focused on one distribution, not all material constants are determined. Our FEM analysis is compared with micromechanical models and other results from the literature. The current work shows that nanotube arrangements lead to different results of elastic properties. The analytical micromechanical models are consistent with the numerical results only for axial Young's modulus and Poisson's ratio, whereas other elastic constants are lower than the numerical predictions. The results of these studies indicate that FEM can predict nanocomposite mechanical properties with good accuracy. This article is helpful and useful to comprehensively understand the influence of CNT arrangements on the elastic properties of nanocomposites.