Suppressing dark counts of multimode-fiber-coupled superconducting nanowire single-photon detector

15Citations
Citations of this article
20Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Large active-area superconducting nanowire single-photon detectors (SNSPDs) coupled with multimode fibers (MMFs) can provide high light-gathering capacity, which is essential for free-space detection applications in photon-starved regimes. However, MMF-coupled SNSPDs often suffer from large system dark count rates (DCRsys) over kHz due to blackbody radiation of the MMF at room temperature. Such large DCRsys would significantly degrade signal-to-noise ratio (SNR) of the receiving system. This paper reports an MMF-coupled large-active-area SNSPD system with low DCRsys by using a homemade cryogenic MMF filter bench. The filter bench, which consists of lenses and optical filters, can provide a high transmittance of about 80% at the central wavelength of the passband (1550 ± 12.5 nm) and a wide blocking range from 500 nm to over 6000 nm at 40 K. With using the filter bench, the DCRsys of an MMF-coupled 9-pixel SNSPD array with an active area of 50 μm in diameter is greatly suppressed by 23 dB with 1 dB loss of system detection efficiency (SDE). The detector demonstrates an SDE of 51% at a DCRsys of 100 Hz for 1550 nm photons. Thus, SNR of the detector is enhanced by about 160 times and the noise equivalent power is improved to 3×10−19 W/Hz1/2

Cite

CITATION STYLE

APA

Zhang, C., Zhang, W., You, L., Huang, J., Li, H., Sun, X., … Xie, X. (2019). Suppressing dark counts of multimode-fiber-coupled superconducting nanowire single-photon detector. IEEE Photonics Journal, 11(5). https://doi.org/10.1109/JPHOT.2019.2937537

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free