Biochar (BC)-supported sulfide-modified nanoscale zerovalent iron (S-nZVI/BC) was prepared using the liquid-phase reduction method for the application of the removal of sulfamethazine (SMZ) from water. The reaction conditions were optimized by the Box–Behnken response surface method (RSM). A model was constructed based on the influence factors of the removal rate, i.e., the carbon-to-iron ratio (C/Fe), iron-sulfur ratio (Fe/S), pH, and hydrogen peroxide (H2O2) concentration, and the influence of each factor on the removal efficiency was investigated. The optimal removal process parameters were determined based on theoretical and experimental results. The results showed that the removal efficiency was significantly affected by the C/Fe ratio and pH (p < 0.0001) but relatively weakly affected by the Fe/S ratio (p = 0.0973) and H2O2 concentration (p = 0.022). The optimal removal process parameters were as follows: 0.1 mol/L H2O2, a pH of 3.18, a C/Fe ratio of 0.411, and a Fe/S ratio of 59.75. The removal rate of SMZ by S-nZVI/BC was 100% under these conditions. Therefore, it is feasible to use the Box–Behnken RSM to optimize the removal of emerging pollutants in water bodies by S-nZVI/BC.
CITATION STYLE
Zhang, T., Hu, C., Li, Q., Chen, C., Hu, J., Xiao, X., … Huang, L. (2022). Hydrogen Peroxide Activated by Biochar-Supported Sulfidated Nano Zerovalent Iron for Removal of Sulfamethazine: Response Surface Method Approach. International Journal of Environmental Research and Public Health, 19(16). https://doi.org/10.3390/ijerph19169923
Mendeley helps you to discover research relevant for your work.