The adverse effects of TiO2 photocatalycity on paraloid B72 hybrid stone relics protective coating aging behaviors under UV irradiation

Abstract

The incorporation of photocatalytic nanomaterials into polymer coatings is used to protect stone relics from weathering. However, the photocatalytic nanomaterials might generate excess free radicals to degrade the polymer matrix. In this work, a certain amount of TiO2 nanoparticles were dispersed into Paraloid B72 and applied onto sandstone relics to explore the adverse effects of TiO2 nanoparticles on Paraloid B72 under ultraviolet (UV) irradiation. To fulfill this goal, the effects of TiO2 on pore formation and the structure of Paraloid B72 was studied by scanning electron microscopy (SEM). Moreover, the surface chemical composition, pore structure, surface roughness and surface wettability were explored via Fourier transform infrared (FTIR) spectroscopy, SEM, optical profilometer and water contact angle measurement under UV irradiation. Results showed that the incorporation of TiO2 nanoparticles prohibited the generation of pores in Paraloid B72 and there were no pores formed when the content of TiO2 exceeded 0.8 wt%. The water contact angle of origin Paraloid B72 and TiO2/Paraloid B72 decreased with the prolonging UV irradiation. Moreover, TiO2 nanoparticles were extracted from the matrix and the pores cannot be detected with the prolonging UV irradiation time under a higher content of TiO2. These research findings might promote the understanding of using photocatalytic nanomaterials in developing stone relics’ protective coating.