Analisis Perbandingan Protokol Routing OSPF dan RIPv2 berdasarkan Variasi Jumlah Router pada Jaringan MPLS dan Tanpa MPLS

Abstract

In a wide scope of a network, it cannot be denied that the number of nodes on the network will increase. This will cause a decrease in the performance of the routing protocol used. So, it is necessary to do research to determine the performance of the routing protocols used. Multiprotocol Label Switching or commonly abbreviated as MPLS is one method that can be used in tuning networks to improve network performance further. This technology can be the best option in terms of low cost and easy to implement. So, MPLS is the best choice of technology that must be tested for its current scalability. The research was conducted by applying simulation and analysis methods using GNS3 simulators and Iperfv3.6 tools. The results obtained showed that there was an increase in performance on the OSPF and RIPv2 routing protocols with MPLS. The Bitrate Parameter increases by 36.40%, jitter by 15.14%, and Packet Loss by 12% for the RIPv2 protocol when implementing MPLS. On the other hand, OSPF using MPLS has increased the bitrate value by 36.86%, the jitter value is 20.65%, and packet loss is 8%.