Theoretical and empirical efficiency of sampling strategies for estimating upper arm elevation

22Citations
Citations of this article
31Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Objectives: To investigate the statistical efficiency of strategies for sampling upper arm elevation data, which differed with respect to sample sizes and sample allocations within and across measurement days. The study was also designed to compare standard theoretical predictions of sampling efficiency, which rely on several assumptions about the data structure, with 'true' efficiency as determined by bootstrap simulations.Methods: Sixty-five sampling strategies were investigated using a data set containing minute-by-minute values of average right upper arm elevation, percentage of time with an arm elevated <15°, and percentage of time with an arm elevated >90° in a population of 23 house painters, 23 car mechanics, and 26 machinists, all followed for four full working days. Total sample times per subject between 30 and 240 min were subdivided into continuous time blocks between 1 and 240 min long, allocated to 1 or 4 days per subject. Within day(s), blocks were distributed using either a random or a fixed-interval principle. Sampling efficiency was expressed in terms of the variance of estimated mean exposure values of 20 subjects and assessed using standard theoretical models assuming independence between variables and homoscedasticity. Theoretical performance was compared to empirical efficiencies obtained by a nonparametric bootstrapping procedure.Results: We found the assumptions of independence and homoscedasticity in the theoretical model to be violated, most notably expressed through an autocorrelation between measurement units within working days. The empirical variance of the mean exposure estimates decreased, i.e. sampling efficiency increased, for sampling strategies where measurements were distributed widely across time. Thus, the most efficient allocation strategy was to organize a sample into 1-min block collected at fixed time intervals across 4 days. Theoretical estimates of efficiency generally agreed with empirical variances if the sample was allocated into small blocks, while for larger block sizes, the empirical 'true' variance was considerably larger than predicted by theory. Theory overestimated efficiency in particular for strategies with short total sample times per subject.Conclusions: This study demonstrates that when exposure data are autocorrelated within days - which we argue is the major reason why theory overestimates sampling performance - sampling efficiency can be improved by distributing the sample widely across the day or across days, preferably using a fixed-interval strategy. While this guidance is particularly valid when small proportions of working days are assessed, we generally recommend collecting more data than suggested by theory if a certain precision of the resulting exposure estimate is needed. More data per se give a better precision and sampling larger proportion(s) of the working day(s) also alleviate the negative effects of possible autocorrelation in data. This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/2.5), which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited. © The Author 2011. Published by Oxford University Press [on behalf of the British Occupational Hygiene Society.].

Cite

CITATION STYLE

APA

Liv, P., Mathiassen, S. E., & Svendsen, S. W. (2011). Theoretical and empirical efficiency of sampling strategies for estimating upper arm elevation. Annals of Occupational Hygiene, 55(4), 436–449. https://doi.org/10.1093/annhyg/meq095

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free