Recirculating flow structures of a square-back Ahmed body at a variable attitude

Abstract

The recirculating flow at the rear of a flat-base three-dimensional body with ground proximity is investigated for different body attitudes defined by the pitch angle varying in the range −1.5◦ < α < +2.6◦ and the yaw angle in the range 0◦ < β < +12◦. Experiments measuring the three components of the mean velocity field in two perpendicular planes intersecting the recirculation area as well as the base pressure distribution are conducted for 50 different attitudes. They provide a clear correlation between the orientation of the spatially averaged reversed flow and the gradient at the centre of the base pressure distribution. Both vectors are found to be in the same so-called w-plane, that is perpendicular to the base of which the azimuthal position changes with the body attitude due to either the flow orientation at the base separation or sometimes to a ground separation for large nose-up pitch. Numerical simulations of the same geometry realised for 10 attitudes show satisfactory agreement with the force coefficients measured in the experiment. Base flow variations induced by attitude changes are also well captured, particularly that of the w-plane. The full three-dimensional simulation data are used to show that the inner structure of the separation bubble is always a tilted recirculation torus, where the tilt orientation is given by the base pressure gradient. At the bubble closure, a pair of longitudinal vortices symmetrically located on both sides of the w-plane are permanently observed with circulations consistent with the circulation of the dividing streamline separation in the w-plane.