Fire protection of a laminated veneer lumber joint by wood carbon phenolic spheres sheeting

Abstract

Laminated veneer lumber joints made with metal plate connectors were protected with wood carbon phenolic spheres (CPS) sheeting and tested for creep under fire. The effects of the carbonizing temperature of charcoal, used as raw material for the CPS sheets, the thickness, and the location of the sheet on the joint regarding the fire-resistance performance of the joint were studied. The time to rupture of the joints covered with CPS sheets made from charcoal carbonized at 800°C (CPS800) was slightly prolonged compared with that of uncovered joints. On the other hand, the time to rupture of CPS sheets made from charcoal carbonized at 1600°C (CPS1600) was markedly extended. The changes in the charcoal properties due to increasing the carbonizing temperature might be the main reason the CPS1600 sheets had higher fire-resistance performance. The thickness and location of CPS1600 sheets have significant effects on the fire resistance of the joint. A highly fire-resistant laminated veneer lumber joint was obtained using a CPS1600 sheet. The CPS1600 sheet with a thickness of 3mm covering three sides of the joint prolonged the time to rupture 16-fold compared with that of unprotected joints.