Surge in a low-speed radial compressor

7Citations
Citations of this article
10Readers
Mendeley users who have this article in their library.

Abstract

Surge is measured in a low-speed radial compressor with a vaned diffuser. For this system, the flow coefficient at surge is determined. This coefficient is a measure for the inducer inlet flow angle and is found to increase with increasing rotational speed. Moreover, the frequency and amplitude of the pressure oscillations during fully-developed surge are compared with results obtained with the Greitzer lumped parameter model. The measured surge frequency increases when the compressor mass flow is throttled to a smaller flow rate. Simulations show that the Greitzer model describes this relation reasonably well except for low rotational speeds. The predicted amplitude of the pressure rise oscillations is approximately two times too small when deep surge is met in the simulations. For classic surge, the agreement is worse. The amplitude is found to depend strongly on the shape of the compressor and throttle characteristic, which are not accurately known.

Cite

CITATION STYLE

APA

Meuleman, C., Willems, F., De Lange, R., & De Jager, B. (1998). Surge in a low-speed radial compressor. In Proceedings of the ASME Turbo Expo (Vol. 1). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/98-GT-426

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free