Abstract
Tar formation during biomass gasification is a major barrier to utilise the produced syngas, which clogs processing equipment. In the present study, steam reforming of gasification-derived tar (phenol, toluene, naphthalene, and pyrene) was catalysed by Ni/dolomite, Ni/dolomite/Al2O3, Ni/dolomite/La2O3, Ni/dolomite/CeO2, and Ni/dolomite/ZrO2 for hydrogen production. The steam reforming experiment was conducted in a fixed bed reactor at 700 °C and the steam-To-carbon molar ratio of 1 under atmospheric pressure. After the catalytic test, the spent catalysts were characterised by thermogravimetric analysis and variable-pressure scanning electron microscope. The aim of this study is to investigate the catalytic activity of Ni-based catalysts in terms of tar conversion and their deactivation characteristic. The current results revealed that all the catalysts showed almost full conversion of tar (98.8%-99.9%) and considerably low amount of coke deposited in the form of amorphous and filamentous carbon (15.9-178.5 mg gcat-1). Among the catalysts studied, Ni/dolomite/La2O3 gave the highest catalytic activity for steam reforming of gasified biomass tar and lowest coke formation.
Cite
CITATION STYLE
Tan, R. S., Alir, A., Mohamad, S. A., Md Isa, K., & Tuan Abdullah, T. A. (2019). Ni-based catalysts for steam reforming of tar model derived from biomass gasification. In E3S Web of Conferences (Vol. 90). EDP Sciences. https://doi.org/10.1051/e3sconf/20199001015
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.