Abstract
Published by Editorial Board Members ofIJAET © This article is distributed by Turk Journal Park System under the CC 4.0 terms and conditions. Flow structure and other aerodynamic properties such as drag and lift coefficients of one of the extensively investigated generic cars so-called Ahmed body are reported in the present numerical study for the fixed ground and upswept rear. For this purpose, Ahmed body with the slant angle of 25 is considered and its rear bottom edge is upswept with various angles from 5 to 30 by 5 increments without any side plates. It is observed that the sizes of the upper and lower recirculation bubbles seen in the profile section are decreased compared with the classical Ahmed body, however, the existence of some additional recirculation bubbles are observed when the upswept angle increases. At the highest upswept angle, the upper and bottom vortices called counter-rotating vortices (CVP) become nearly symmetric in the near-far region however they merge and only one CVP forms behind the body in the far-field. Effects of the upswept angles on the drag and lift coefficients reveal that drag coefficient reduces the upswept angle to 15and then rises at 20 while lift coefficient increases after 25.
Cite
CITATION STYLE
Bayraktar, S., & Bilgili, Y. O. (2018). Effects of under body diffuser on the aerodynamics of a generic car. International Journal of Automotive Engineering and Technologies, 7(2), 99–109. https://doi.org/10.18245/ijaet.458901
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.